Quick start guide
On the controller on top of the podium, press DISPLAY ON, and choose a button to select your input.
If you want to show slides in presenter mode, your best bet is to plug in a laptop using an HDMI or VGA cable, which you should find on the podium. Choose LAPTOP on the push buttons, choose between HMDI or VGA on the touch screen, and wait for the projector to show your desktop; hit the present button, and you should see your notes on your laptop and the slides on the projector. You may need to plug in a secondary cable for audio.
If you want to run Zoom and send the camera and microphone feeds there, you will need to do that from the podium computer. Choose the PC input on the push buttons. Use the audio settings on Zoom to make sure you have the right speaker and microphone selected–the ‘Test Speaker & Microphone’ tool on Zoom is very helpful for this. The microphone is a wired mic on the podium.
When you are finished, press DISPLAY OFF on the podium, and log out from (do not shut down) the podium computer.
View the full podium instructions for a push button touch screen podium here.